PRODUCTS


No data

No data

Product Details


+
  • 烧端子机.jpg

Terminal Welding Machine

Category:

Battery assembly equipment


Consult

Product Description

Terminal Welding Machine

This machine is mainly used for brazing of positive and negative terminals and terminal height inspection of lead-acid batteries.

Technical Parameters

  1. Main application: Brazing of positive and negative terminals and terminal height inspection for lead‑acid batteries
  2. Voltage: 380V/50Hz; Total power: 5.0 kW
  3. Air supply: 0.5–0.8 MPa; Air consumption: 20 L/min
  4. Overall dimension (L×W×H): 3600 × 1470 × 2100 mm
  5. Conveying type: Stainless steel slat chain
  6. Worktable height: 750 ±30 mm
  7. Total installed weight: 2200 Kg
  8. Capacity: Matches the throughput requirement of the whole production line
  9. Natural gas consumption & pressure: 1.3 L/min, 0.15 MPa
  10. Oxygen consumption & pressure: 4 L/min, 0.3 MPa
  11. Cooling water consumption & pressure: 2.5 L/min, 0.2 MPa

Mechanical & Functional Features

  1. No additional lead required; no lead skin peeling after welding.
  2. High terminal dimensional accuracy after welding: ±1 mm.
  3. The brazing head is motor-driven; parameters are set via touchscreen.
  4. Automatic terminal height inspection after welding, with rejection function.
  5. Fully enclosed operation, unattended running.
  6. Motion control system: Driven by pneumatic components and motors. Controlled by PLC programming with touchscreen HMI. It supports equipment operation, parameter modification and storage. Fault alarm points are displayed on the touchscreen, accompanied by flashing alarm lights.

Intention message

Submit message